This is a public forum, you should remove your email to avoid spam.
None of us volunteers/fellow software users are going to be emailing you; any answers/comments will come on this thread.
So, you had to set up an account and then you can make payments for multiple accounts?
yes
I use my ID.Me account for logging into EServices and my PTIN account and uploading POA/8821s and TDS, I think all tax professionals should have one these days.
@Lisa Johnson I created an account through login.gov for my EFTPS access. It took less than 2 minutes to create the account. I could share this with an employee without any worries about personal information being compromised.
@dkh thanks for the information. I'll try to do that tomorrow as I have been up since 4:00 and I just ate two big pieces of pizza. So it's quitting time now and I'm going to take a nap.
I was able to register with id.me and send the clients 941 deposit EFTPS. No problem like Iron Man said, nice and easy. I initially tried with the login gov website. But when I entered the password, it said I already had an account with a different password. This must have been from eServices Efin or something from years ago. So I just backed out. Then set up the ID.me. I'm waiting now for another client to send me the information so I can see if it works for that client EFTPS.
Just wondering and no biggie but there are approximately 108 comments on this thread, but only 32 thumbs up which is obviously not correct. One would think that intuit would be able to add correctly considering their line of work.
I decided to work on some quarterly payroll reports and was met with this mfa issue. I just clicked on ID.me and entered my firm's information and password. There was a question answer about allowing accessing the treasury dept with the ID.me. After answering yes, I was taken back to the same old screen where you enter EIN, PIN and password and I am working on client quarterly reports now. Not a big deal. Just sign up for ID.me and you're good to go.
@klgoodwin61 thanks for the information. Please come back and participate again. We need more tax pros helping on this forum. Thanks.
I just e-filed 941 deposit for another client so everything is working okay. Also a tax accountant on another forum mentioned that he was already registered for the login gov website before when he e filed a US Census report. I have e filed US census reports in the past also for clients so that is maybe why I was registered previously on login gov.
I log in for my clients to schedule their payroll tax deposits. I used my ID.me login when prompted for the EFTPS site, and agreed to allow my information to be shared with the IRS site. Then it allowed me to login using my client's information to access their account. I've only done this for one client, so I haven't checked to see if it remembers the login, or if it will allow me to access a different client each time I log in. If you have an ID.me login, you may be able to access your clients' accounts..... Okay, I just tried to login to EFTPS again after closing out the webpage, and it didn't even send me to ID.me, just went straight to the EFTPS login, so it "remembered" me? By the way, I won't use Login.gov because I recall they lied about services and charges to clients and were subject to a hearing on the matter back in March.
@Glenview when you hit make payment on the EFTPS first page, then you may have to sign in to id.me. which is no problem and real quick. Then it'll send you back to EFTPS. That's what it did with me and I believe with others.
I set up a login.gov account. It only took a few minutes. I just enter my phone number for texts for step authentication. Once I logged in, then you get the regular screen to enter client log in informatin (EIN, PIN and password).
My question is simple: Can we still make EFTPS payments using QuickBooks Desktop? To be clear, I'm not asking about logging into EFTPS, I already have the required 'Login.gov' account. Can I still use QB Desktop to send EFTPS payments?
Hi All,
You CAN make (1) login through login.gov and then be able to remit your clients taxes on EFTPS.gov. I just tried it. I make deposits for clients monthly and was concerned each client had to have their own MFA login but NOT the case. I would also use the same broswer you use EFTPS.gov through that you setup login.gov with, it seemed to remember me (eftps.gov) and I didnt have to re login with login.gov info beforehand.
Your welcome everyone 😎
"Your welcome everyone" ?????????
Unless those anvils are really starting to catch up with me quickly, hasn't that same basic information been posted several times in this post already?
I have done the same, super easy. But many of our clients we've setup to pay EFTPS payments through QB Desktop, and I need to know if Intuit supports this ability still, do you know?
From what I'm reading, it only applies to users of the EFTPS website.
So if you are paying through QBO Payroll, etc., the process hasn't changed except that now you will need to go on to EFTPS to change your password every 13 months.
We have a few client's whose deposits we make through QBO, but most we make using EFTPS. This is going to be a nightmare.
Well thanks, but I am specifically talking about Desktop , and not the online version.
the thread I found on the QB discussion board just addressed the fact that passwords now expire every 13 months. So there are now 2 new steps when your QB tax payment fails:
1. go to EFTPS and change password
2. wait an hour, then log in to QB with new password.
But it doesn't mention needing the new MFA account in order to change EFTPS password, so I don't know.
@Don-at-BergChatfield does QuickBooks desktop have a technical support number that you can call?
I am also new to this but I have been an EFTPS user for years. I chose Login.gov to authenticate and all I had to do was provide a method of authentication. I chose a text to my cell phone and a call to my land line as a a backup. No photos, etc were required.
I also found a software to download from the EFTPS site - Go to Help & Information at the top of the page and look at Downloads. Look at Documents for Batch Provider Software User Manual. Go to Software to actually download the program. I have not done this yet as the only client I did payroll for I recently fired for not getting me information in a timely manner.
Hope this helps!
This is my issue to. I make my clients EFTPS deposits weekly and monthly. I was caught off guard this morning when I went to go make the tax deposits. I don't know what to do because I have five different clients that I have to make the tax deposit for.
I can acess all my clients EFTPS accounts from my single, personal id.me account.
I just submitted EFTPS payments through QB Desktop (3 businesses) I had never done it thru
desktop - just went directly through EFTPS. the PIN and password were alreadyin place I just entered it into the epay setup. Just received confirmation its done and wa-la.
The only feasible solution for my firm is to go back to phoning in EFTPS payments for our clients. It works fine, and I've created a pdf template for my employees to type in the information for the call including the confirmation number.
I do not want each of my employees (and/or myself) to create a login using their personal information since we are a corporation. Corporate accounts requiring personal information are a big accounting no-no.
I logged in with my I.D. Me account and voila! Once I entered my credentials, it automatically sent me back to the EFTPS site. Setting up a new account with the other sites is just too much right now. I don't have time for all the additional steps. Especially since they didn't send out any official notifications and I need to make some payments today and Monday. I also plan to set up the e-file payments directly through QuickBooks Desktop for my employer and my church!
Login.gov literally only asked for my work email and a phone number; not even my name.🤔
For multi factor authentication, I had a choice between texting a code to my cell, printing out a list of single use codes, and a list of other options that I can't remember. I set up to text to my cell and printed a list of single use codes for our office manager to access with my permission if I am sick or otherwise unexpectedly out of the office (or I forget my phone at home).
I will be creating an id.me account so I can see my personal tax transcripts, etc., but I have no intention of using that account for work related access like paying client taxes.
Thanks so much for that! When I researched it said it required a lot of personal info. I just set up the Login.gov account for our corp with literally no personal info and used our office text phone for verifications. This should be posted as THE SOLUTION.
@realitycheck here is a reality check, and don't take this the wrong way please, but if you want the solution that you want, then you can go start your own op thread and choose that for your solution. There's a multitude of posts on this subject.
Dan... as the OP, do you have the ability to lock this thread? It's getting a bit cumbersome & is obviously showing up in searches for non-tax pro's
edit - added:
@abctax55 Anna, I checked and it doesn't look like I can do that. But if Gabi at Intuit wants to do that then that is fine with me. There are many comments on this matter, and people should read through all of them and make their own decision.
"and people should read through all of them and make their own decision."
Based on the history of this place, I am waiting for page 4 to be generated and have someone ask if you have found a solution yet.................................... a lot of folks visiting here do not like to read 😀
I'm sorry to piggyback on this old post, but I wanted to get a sense of how people are faring with using EFTPS & ID.me. Several people in the firm already have ID.me accounts, but haven't made the plunge of paying clients payroll tax liabilities through EFTPS anymore due to the MFA fun. Specifically, how do you best get permission pay your clients taxes on EFTPS now? Is it best to get them to sign a 8655 Reporting Agent Authorization form? It's also been suggested to have the client sign an IRS 2848 Power of Attorney form. Not sure the best way to go about it. Your thoughts are most appreciated!!!
You have clicked a link to a site outside of the Intuit Accountants Community. By clicking "Continue", you will leave the community and be taken to that site instead.