Personally, I think a stick of dynamite under the compute...

Just-Lisa-Now- · ‎12-07-2019

I'm not seeing any other posts about this....do I need to do some kind of manual fix somewhere to make it recognize that CA is up to date??

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Just-Lisa-Now- · ‎12-07-2019

@Ashley at Intuit (aka Henry Jr) ?

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Just-Lisa-Now- · ‎12-07-2019

My About ProSeries shows version 2018.17.00.11 and CA module version 2018.34.0.0

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Ernie · ‎12-07-2019

Lisa:

When I have this problem all I usually have to do is to open the return, save it on the federal and the go and save it on the state and it fixes the problem.

IntuitAustin · ‎12-07-2019

Okay, this has turned into a known issue; our development team is currently researching the issue and I will provide updates as we get them. INV-34091

Thank you for bringing this to our attention Lisa

**Say "Thanks" by clicking the thumb icon in a post
**Mark the post that answers your question by clicking on "Accept as solution"

View solution in original post

Just-Lisa-Now- · ‎12-07-2019

That actually makes me feel better! Thank you! Was hoping it wasn't just me!

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Just-Lisa-Now- · ‎12-07-2019

Oh geez and I cant print anything from the program right now.....I think another reboot might fix part of that, I usually have to reboot after an update to print to the printer, but I can usually print to PDF though and that's not working either.

I think I'll take a 3 day weekend and see it things are working better for me next week!

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

IntuitAustin · ‎12-07-2019

A 3 day weekend usually fixes most issues right?

**Say "Thanks" by clicking the thumb icon in a post
**Mark the post that answers your question by clicking on "Accept as solution"

IRonMaN · ‎12-07-2019

Personally, I think a stick of dynamite under the computer provides more gratification.

Slava Ukraini!

IntuitAustin · ‎12-07-2019

ACME must make a lot of money off you @IRonMaN

**Say "Thanks" by clicking the thumb icon in a post
**Mark the post that answers your question by clicking on "Accept as solution"

Just-Lisa-Now- · ‎12-07-2019

ok a reboot fixed the printing to the printer issue...Im still taking a 3 day weekend! buhbye!

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

IRonMaN · ‎12-07-2019

@Intuit Austin - That's why I spend so much time here. I need the extra money to pay for all of their stuff.

Slava Ukraini!

IntuitAustin · ‎12-07-2019

Hey Lisa, try uninstalling the CA form set, then reinstall CA. My version matches yours and I am up to date. Let me know if that doesn't work

**Say "Thanks" by clicking the thumb icon in a post
**Mark the post that answers your question by clicking on "Accept as solution"

Just-Lisa-Now- · ‎12-07-2019

Uninstalled CA, then reinstalled it...same message

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Just-Lisa-Now- · ‎12-07-2019

I didn't reboot in between.....let me try it again, just in case that makes any difference

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Just-Lisa-Now- · ‎12-07-2019

still no luck, here are my screen shots of the message the version and the CA component version....that's different than the 2018.34.0.0

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

Just-Lisa-Now- · ‎12-07-2019

I filed a CA return on 7/17 with no issues, so something changed between then and now.....looks like I updated on 6/13 but didn't again until today....it didn't give me any message with the return I filed on 7/17.

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

IRonMaN · ‎12-07-2019

The woes of updating. I still close one eye and cross my toes whenever I run an update. Why are there so many updates 3-1/2 months after the due date of the returns?

Slava Ukraini!

Just-Lisa-Now- · ‎12-07-2019

I never update until it forces me too and I white knuckle the desk the entire time its downloading!

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪

IRonMaN · ‎12-07-2019

I never do either but I had a bunch of procrastinators that magically appeared in July.

Slava Ukraini!

Just-Lisa-Now- · ‎12-07-2019

my stragglers are starting to straggle in

♪♫•*¨*•.¸¸♥Lisa♥¸¸.•*¨*•♫♪